OEM Auto parts and Its Catalogue Part 2
- Condenser:- A condenser is located at the front of the vehicle and its main function is to exchange heat. The condenser cools off the refrigerant which gets heated by the compressor and turns it into liquid.
- Condenser/Radiator mounted Cooling Fan:- At the time condensation process, a condenser cools down the temperature of the refrigerant. After cooling down the temperature, the cooled refrigerant is passed through the vehicles air conditioner vents
- Control Arm:- A control arm connects the steering knuckle to the frame and steadies your car by letting the chassis and wheels move in accord while the vehicle is moving.
- Convertible Top Motor:- Some high-end vehicles come with electric convertible tops, while some come with manual convertible tops. The electronic tops have a device that is designed to fold and unfold the frame it is also referred to as a power top.
- Core (Radiator) Support:- The core radiator holds the radiator and radiator cover in place by locking radiator in place. It helps in keeping a vehicle's components aligned with your fenders and hood.
- Crank Pulley (Harmonic Balancer):- The crankshaft pulley or harmonic balancer is situated at end of the crankshaft. The main purpose of a Harmonic Balancer absorbs and removes vibration caused by twisting of the crankshaft.
- Crankshaft:-The crankshaft or crank is connected to the pistons by rods, which have a bearing at their end. Its main function is to balance the forces created by the pistons moving up and down and the crank.
- Cruise Control Computer:- A Cruise control also known as autocruise or speed control is an automatic system that controls the speed of a vehicle. The system is a servo that takes over the throttle of the car to maintain a steady speed as set you.
- Cylinder Head (Engine):- The cylinder head controls the air flow in and out of the cylinders and fuel distribution. Is also holds the injectors and valves and covers more moving parts than any other part of the engine. OEM auto part has a wide range of cylinder head engine available at a very reasonable price, please visit our site to find your cylinder head
- Differential Assembly:- A differential is part of the front or rear axle assembly. It permits the wheels to rotate on the same axle at different level of speeds. When your car goes around sharp turn the wheel on the outside travels faster than the wheel on the inside, differential makes it possible. Differential assembly is a vital part of your vehicle and important for your safety OEM auto parts team would recommend getting it replaced when it is not functioning properly.
- Deck Lid:- The upper part of the trunk is called Deck lid, and part of the deck lid which holds the latch, is called the deck lid panel and panel usually holds the vehicles emblem.
- Drive Shaft, Front and Rear:- Drive Shaft is one of the most important components in your vehicle. It responsible for distributing the power made by your engine and sending it to the precise area of your vehicle.
- Electric Door Motor:- The automatic door of your vehicle uses electricity to power a motor to open the doors. The actuator sends a signal that makes operator to open the door.
- Electric Window Motor:- The Electric Window Motor works similarly to electronic door motor, it is responsible for letting down and up of windows when the power window button is pressed.
- Engine:- The main purpose of an engine is to convert gasoline into motion so that your vehicle can move. A vehicles engine is an internal combustion engine the whole process takes place internally. OEM auto part has a wide range of engine available at a very reasonable price, please visit our site to find your engine.
- Engine Computer:- The engine computer or engine control unit looks after all necessities for your vehicle’s engine. It adjusts to changing conditions and drivers driving patterns and makes sure that the car is running efficiently. Engine computer is considered brain of your vehicle you your car may not function correctly if its damaged. OEM auto parts has extensive collection of engine computer of various vehicles please visit our website to find your perfect match.
- Engine Oil Pan:- The engine oil pan of a vehicle is an oil reservoir, it’s a spot for the oil to collect when the engine isn't running. This is where the oil cools when the air passes, and impurities settle and old oil is removed through drain.
- Fan Clutch:- A fan clutch is considered one of the most important part in the process of cooling fans and significantly contributes to the entire operation of an engine. If you have and old vehicle you may have a mechanical fan clutch and if you have new vehicle, it will have electric cooling fans.
- Flywheel:-A flywheel is a rotating mechanical device fitted in crankshaft which stores kinetic energy and release it when your vehicle requires it.
- Fog Lamp:- The main function of the fog lamp is to show the driver the road boundaries, lane marks and to provide clear visibility to the driver during road drive. In case of bad weather, heavy snow/rain and fog, a fog lamp should be used with headlamps to move slowly and safely to your destination. OEM auto parts team always advises our customers to replace your fog lamps as and when required for a safe drive.
- Front Axle Assembly:- The front axle carries the weight of the front part of your vehicle. It also helps in smooth steering by absorbing shocks due to uneven road. The front axles have four main parts axle beam, swivel pin, stub axle and the track rod.
- Front Axle Beam:- An axle beam is a firm beam which joins a passenger side wheel and driver side wheel. Front axle beam is generally used in heavy and large vehicle like trucks and passenger vehicles.
- Front Axle Beam:- An axle beam is a firm beam which joins a passenger side wheel and driver side wheel. Front axle beam is generally used in heavy and large vehicle like trucks and passenger vehicles.
- Front Door Regulator:- The mechanism of moving your vehicles window up and down is called door/window regulator. Each door of your vehicle has one window regulator which could be manual or automatic depending on how old or new your vehicle is.
- Front Door Vent Glass:- The main purpose of vent glass is to allow the driver to have a quick view of the surrounding, it helps the driver by increasing the visibility of side view mirrors and the front area of vehicle. Front door glass vents are commonly found in older vehicles.
- Front Door Window Motor:- The Door/window motor is in charge for lowering and rising of your car windows when the power window button is pressed. Many of new vehicle models are consist of both motor and regulator assembly, if not working properly both need to be replaced together.
- Front Drive Shaft:-The front driveshaft moves torque to transmission which transfers it to differential which enables the wheel to move setting the into vehicle into motion.
- Engine Block:- The Main Function of an engine block is to assist the components of the engine
